What are the main causes of leaks in magnetic pumps

What are the main causes of magnetic pump leaks? Common reasons are pipe seepage crack, loose component connections, isolation sleeve wear, etc., want to avoid this failure only need to standardize the use of magnetic pumps and do a good job of regular maintenance, in order to protect the pump experience of customers, in the pump industry on the handling of such failure measures are introduced for reference.

What is the main reason for the leakage of magnetic pump, common causes and handling methods are as follows.

1, the pipeline is broken: in the unexpected working conditions lead to broken pipeline, or because the installation does not meet the standard and lead to early aging pipeline rupture, it is recommended to install the pipeline in accordance with the corresponding standards, pay attention to the pipeline to set independent support frame, and pay attention to the temperature of the transported medium, if the transport of high temperature liquid, need to consider in advance the pipeline in temperature and pressure changes will exist a certain contraction, so the pipeline can not be too taut.

2, isolation sleeve wear: magnetic pump isolation sleeve thickness is three times the ordinary shield pump, with reliable protection, but if the transported medium contains more than standard hard particles, or may lead to isolation sleeve is cut through, especially containing iron particles such as oversized particles, will increase the damage to the pump under the influence of magnetic force. In this regard, in addition to the pump inlet to install a filter device, more should be checked in advance whether the medium contains more than the transport standard of particles debris.

3, the relevant connections loose: usually because of improper installation, or the use of a long time due to the need for proper installation and regular inspection, for the loose place to re-tighten can be, if due to aging or other reasons damage caused by normal tightening, it is necessary to replace the new parts.

On the whole, the main reason for the leakage of magnetic pump what the problem, whether the cause or the corresponding treatment is not complicated, but the harm caused by this failure should not be underestimated, especially when transporting hazardous media, if there is a leak, not only may pollute the environment, but also may hurt personal safety, so it is recommended that customers in the process of using the pump always keep monitoring the pump, in each start before Check the performance of the pump, so as to reduce the incidence of failure.

Above, the main reason for the leakage of the magnetic pump, if you encounter other problems with the pump, you can further refer to the station related information, but also directly with zhaoquan screw pump industry technical customer service contact.