The use of magnetic pumps and precautions

Magnetic pumps are frequently used for transporting various types of high-risk liquids due to their reliable sealing performance, and are a high safety standard pump product.

About the use of magnetic pumps and precautions, related matters are as follows.

1, installation: according to the size of the pump type reasonable choice of installation location, not too high to affect the normal suction range of the pump, pay attention to the motor around a certain amount of space reserved for heat dissipation, and to ensure a clean environment, to prevent foreign objects into the motor, check the tightening of the connections after completing the installation work.

2、Check before starting the machine: use the tool to disc the pump several times to confirm that the transport is not stuck, the fan impeller should rotate flexibly and can be run for a few seconds to confirm the correct steering.

3, start-up operation: operation if the pumped liquid level is higher than the pump axis centerline, it is necessary to open the suction pipeline valve before activation, if the pumped liquid level is lower than the pump axis centerline, the bottom valve is configured for the pipeline.

4, parameter optimization: according to the pump type label and motor power, reasonable adjustment of operating parameters, and maintain parameter monitoring, if there are fluctuations in flow, pressure, etc., need to stop in time to check the cause.

5、After starting the motor, take care not to adjust the flow rate rapidly and drastically, but open the discharge valve slowly after starting the pump, and after the pump enters the normal working condition, then open the discharge valve opening as needed.

6、When stopping the pump, close the discharge valve first, and then close the suction pipe valve.

Above, a brief introduction to the use of magnetic pumps and precautions, in practice, if you encounter other problems, welcome further consultation zhaoquan screw pump industry station technical customer service.

Zhejiang Zhaoquan Pump Manufacturing Co., Ltd., founded in 2010, is a pump manufacturing factory specializing in R & D, design, production and sales. The company's main products: pneumatic diaphragm pump, electric diaphragm pump, magnetic pump, screw pump, horizontal stainless steel shielded pump, etc. we can provide you with suitable products according to your needs. Strive to achieve "high quality and high service", take the interests of customers as the starting point, and achieve customer satisfaction.