Can a screw pump pump sand?

Can a screw pump pump sand? Mainly depends on the specific gravity of the medium, if the liquid contains some particles of sediment, usually can be pumped normally, such as pond sediment water, industrial production wastewater, underground well water, etc., as long as the corresponding calibre of the pump type can be used, single screw pump itself is a special equipment to deal with complex components of the medium, the focus is on the proper selection according to the working conditions, see below.

For the screw pumpcan pump sand this issue, the user only needs to clarify the liquid sediment content in advance, as long as the specific gravity is not less than 90%, can be freely pumped. At present, the pump industry can now provide as many as dozens of screw pump products, in addition to sludge screw pump and professional sewage pump, to ensure that customers can properly handle a variety of debris content of the cesspool, sewer, industrial wastewater, septic tanks, etc.. The I-1B thick slurry pump, for example, is a sludge screw pump that has been tested in the market for a long time.

In practice, the characteristics of screw pumps are reflected in the outstanding adaptability and stability of the medium, while sewage pumps can maintain a relatively high flow rate when dealing with wastewater, and some models can also be submersible, although if the medium is too viscous, or even difficult to self-flow, it is difficult to perform the pumping work, so how to choose the pump type needs to be considered according to the actual transport needs of the user. If the screw pump is a temporary alternative to the sewage pump work, it is undoubtedly feasible, only in the process of operation need to monitor the operating parameters to avoid overload operation.

If you want to pump liquids containing sediment, it is recommended to use the I-1B type thick slurry pump, which is designed based on the working principle of the single screw pump and is a professional sludge screw pump, using nitrile rubber material and 2Cr13 and other steel to make the stator and rotor, which can be configured according to the actual needs of the induction speed motor or frequency motor, etc. When choosing the model of this product, you need to first clarify the viscosity of the medium, water content When choosing this model, the viscosity, water content and other parameters of the medium should be specified. The equipment can be self-priming, the flow rate is determined by the speed, stable infusion during operation, will not produce overflow phenomenon, so that customers no longer need to worry about the screw pump can pump sand this problem.

Above, the introduction of the screw pump can pump sand, customers do not need to have this convenient worry, as long as the corresponding selection work can be done, in the process of any questions can be directly consulted zhaoquan pump industry.